The ridge is the very top part of the roof, which is probably the most important. Although normally highly decorated its job is to protect the last layer of thatch and fixings of the roof. When the ridge wears out the fixings below get damaged so it is important to re-ridge before it gets to this stage.
Block ridge – This type of ridge stands proud of the roof with either a ‘V’, a scallop, both, a straight edge cut into the ridge or whichever pattern design you choose, topped with the elaborate stick work of crosses in between the horizontal ledgers.
Wrap over ridge – Sits flush with the main roof and has two layers of reed wrapping directly over the top of the apex of the roof, thus capping it off. Finishing with horizontal ledgers and cross sticks (This in my opinion is the best type of ridge).
Butt up ridge – This is two layers of reed butted tightly against each other at the top, sealing the ridge and topped with the same ledgers and cross sticks.
Rope ridge – this is generally an extra onto the wheat flush ridge, an elaborate twist of wheat along the apex looking like a twisted rope.
All ridges are wired as standard with a good width and gauge of wire to cover all stick work. Ridges tend to last 8-10 years with a block or wrap, tending to be better than a butt up.